Publications
Software Support for Metrology - Publications
Papers/Articles
- A Dynamic Instrumentation Framework for Remote Operation of PC-Connected Devices
GI Parkin, Mike Stevens, Åsmund Sand(Main author); in 2006 IEEE VEHCIMS
- A Monte Carlo method for uncertainty evaluation implemented on a distributed computing system
PM Harris, T J Esward, A de Ginestous (Heriot-Watt), I D Hill (retired), S G R Salim, I M Smith, B A Wichmann, R Winkler, E R Woolliams
in Metrologia, 2007, 44, (5), 319-326
- A practical model of mesopic photometry
AB Forbes; in IMEKO XVIII World Congress
- A probabilistic approach to the analysis of measurement processes
MG Cox, Giovanni B Rossi (U Genova), Peter Harris
- Accounting for physical knowledge in obtaining measurement results and associated uncertainties
MG Cox, A Forbes, P Harris, J Sousa; in IMEKO XVIII World Congress
- Aggregating measurement data influenced by common effects
PM Harris, M A Collett, M G Cox, T J Esward, J A Sousa
Metrologia, 2007, 44, (5), 308-318
- An outline of Supplement 1 to the Guide to the Expression of Uncertainty in Measurement on Numerical methods for the propagation of distributions
MG Cox; in Izmeritelnaya Technika
- Analysis of key comparison data: unstable travelling standards
MG Cox, C Elster (PTB), W Wöger (PTB); in Izmeritelnaya Technika
- Analysis of key comparison data: unstable travelling standards
MG Cox, C. Elster (PTB), W. Wöger (PTB); in Measurement 2005, 48, 883-893
- Approximation with asymptotic polynomials
AB Forbes, Philip Cooper, John Mason; in Algorithms for Approximation V
- Asymptotic least squares and t sampling distributions
AB Forbes; in AMCTM 2005
- Bayesian estimation methods in metrology
AB Forbes, M G Cox, P M Harris; in MaxEnt 04
- Combining direct calculation and the Monte Carlo method for the probabilistic expression of measurement results
PM Harris, M G Cox, G B Rossi (University of Genova), F Crenna (University of Genova); in AMCTM 2005
- Convolution and uncertainty evaluation
PM Harris, M G Cox, J Korczynski
in AMCTM 2005, World Scientific Publishing, 2006, 188-195
- Data evaluation of key comparisons involving several artefacts
MG Cox, P M Harris, Emma Woolliams
in AMCTM 2005, Lisbon, Portugal, June 2005, 23-34
- Draft GUM Supplement 1 and Bayesian analysis
MG Cox, Clemens Elster (PTB), Wolfgang Wöger (PTB); in Metrologia
- Ensuring numerical correctness using the Internet
GI Parkin, P M Harris; in Comp Stnd & Interfaces
- Evaluation of the uncertainty associated with comparison loss in microwave power meter calibration
MG Cox, P M Harris, G Iuculano (University of Florence), G Pelligrini (University of Florence); in AMUEM 2006
- Evolution of the Guide to the expression of uncertainty in measurement
MG Cox, Walter Bich (INRIM), Peter M Harris; in Metrologia
- FOREWORD. Special issue on Statistical and Probabilistic Methods for Metrology
MG Cox, Walter Bich (INRIM); in Metrologia
- Generating good pseudo-random numbers
BA Wichmann, I D Hill; in Computational Stats. and Data Analysis
- Harmonisation of coupled calibration curves to reduce correlated effects in the analysis of natural gas by gas chromotography
MG Cox, Gergely Vargha, Martin Milton, and Sarantis Kamvissis; in J. Chromatography A
- Implementation of a generalised least-squares method for determining calibration curves
PM Harris, M Milton, I Smith, A Brown, B Goody; in Metrologia
- Interharmonics analysis and measurement methods applied to mains frequency compliance testing
PS Wright; in IEE Proc Science Meas & Technology
- Internet-Enabled Calibration: An Analysis of Different Topologies and a Comparison of Two Different Approaches
GI Parkin, Mike Stevens, Åsmund Sand(Main author); in IEEE Trans Instrum Meas.
- Measurement Systems Analysis and Statistical Process Control
AB Forbes; in AMCTM 2005
- Measurement systems analysis, concepts and computational approaches
AB Forbes, Christophe Perruchet; in IMEKO XVIII World Congress
- Measurement uncertainty and traceability
MG Cox, P M Harris; in Measurement Science and Technology
- Mesopic visual efficiency IV: a model with relevance to night-time driving and other applications
AB Forbes, T M Goodman, others; in Light. Res. Tech.
- Modelling mesopic efficiency functions
AB Forbes, T M Goodman, A B Forbes, H C Walkey; in IMEKO XVIII World Congress
- Prediction of underwater acoustic radiation from axisymmetric bodies
with arbitrary boundary conditions on a distributed computing system
L Wright, Stephen Robinson, Victor Humphrey; in BIPM-PTB 2007 Impact of IT
- Recent recommendations of the Consultative Committee for Length (CCL) regarding strategies for evaluating key comparison data
MG Cox, Jennifer E. Decker (NRC), N. Brown (NMIA), A. G. Steele (NRC), R. J. Douglas (NRC); in Metrologia
- Self-calibration of a novel surface texture measuring instrument
AB Forbes, R K Leach; in Laser mapping and maching performance, Cranfield, 25-27 June 2005
- Spline approximation using knot density functions
AB Forbes, Andrew Crampton; in Algorithms for Approximation V
- Structured Nonlinear Gauss-Markov regression
AB Forbes; in Algorithms for Approximation V
- Surface fitting taking into account uncertainty structure in coordinate data
AB Forbes; in ISMTII 2005
- Surface fitting taking into account uncertainty structure in coordinate data
AB Forbes; in Measurement Science and Technology
- Technical aspects of guidelines for the evaluation of key comparison data
MG Cox, P. M. Harris; in Izmeritelnaya Technika
- The area under a curve specified by measured values
MG Cox; in Metrologia, 2007, 44, (5), 365-378
- The area under a curve specified by measured values and the associated uncertainty
MG Cox; in Metrologia
- The detection of transient behaviour in environmental vibration for the Watt balance
IM Smith, F-X Maletras, X Jiang (University of Huddersfield), W Zeng (University of Huddersfield), P Scott (University of Huddersfield/Taylor Hobson Ltd);
in Measurement Science and Technology
- The evaluation of key comparison data: determining the largest consistent subset
MG Cox; in Metrologia
- The generalized weighted mean of correlated quantities
MG Cox, C Eiø, G Mana (INRIM), F Pennecchi (INRIM); in Metrologia
- The use of a Monte Carlo method for evaluating uncertainty and expanded uncertainty
MG Cox, Bernd R. L. Siebert (PTB); in Metrologia
- Uncertainty associated with co-ordinate measurements
AB Forbes, P M Harris; in Laser mapping and maching performance, Cranfield, 25-27 June 2005.
- Uncertainty evaluation associated with fitting geometric surfaces to coordinate data
AB Forbes; in Metrologia
Good Practice Guides
- SSfM Best Practice Guide No 1: Validation of Software in Measurement Systems
RM Barker, Brian Wichmann (retired), Graeme Parkin
NPL Report DEM-ES 014
- SSfM Best Practice Guide No 4: Discrete Modelling and Experimental Data Analysis
AB Forbes, RM Barker, MG Cox, PM Harris
NPL Report DEM-ES 018
- SSfM Best Practice Guide No 6: Uncertainty evaluation
PM Harris, M G Cox
NPL Report DEM-ES 011
- SSfM Best Practice Guide No 7: Development and Testing of Spreadsheet Applications
RM Barker, GI Parkin, PM Harris
NPL Report DEM-ES 013
- SSfM Good Practice Guide No 13: Data Visualisation
L Wright, T J Esward, P M Harris, J Gilbey, J Walton
NPL Report DEM-ES 009
- SSfM Good Practice Guide No 14: Guidance and Tools for Interactive Web Pages
Steve Gardner
NPL Report DEM-ES 002
- SSfM Good Practice Guide No 15: Continuous Modelling
L Wright, T J Esward
NPL Report DEM-ES 026
- SSfM Good Practice Guide No 16: Testing algorithms and software
RM Barker, P M Harris, L Wright
NPL Report DEM-ES 003
- SSfM Good Practice Guide No 17: Distributed computing for metrology applications
TJ Esward, N J McCormick, K M Lawrence, M J Stevens
NPL Report DEM-ES 006
- SSfM Good Practice Guide No 19: Internet-enabled Metrology Systems
RM Barker, GI Parkin
NPL Report DEM-ES 012
- SSfM Good Practice in Signal Processing for Metrologists: a guide to Internet-based signal processing resources
TJ Esward, F Onakunle, D Georgakopoulus
NPL Report DEM-ES 020
NPL Reports
- An Introduction to the Parallel Coordinate Technique Applied to Measurement Data
L Wright
NPL Report DEM-ES 015
- Best Practice in Software Development – A Case Study Illustrated by the Softgauges Project
RM Barker, Peter Harris, Graeme Parkin, Michael Stevens
NPL Report DEM-ES 022
- Best Practice in Software Development – A Case Study in LabView Illustrated by the UHTBB Safety System Monitor Project
JR Mountford, Graeme Parkin
NPL Report DEM-ES 023
- Deriving uncertainties when using simulation in metrology
TJ Esward, L Wright
NPL Report DEM-ES 017
- Generating good pseudo-random numbers
BA Wichmann, I. D. Hill
- Least squares approaches to maximum likelihood estimation
AB Forbes
NPL Report DEM-ES 019
- Mathematical Modelling for Metrology at the Nanoscale
TJ Esward, V P Sokhan
NPL Report DEM-ES 005
- Software specifications for uncertainty evaluation
PM Harris, M G Cox
NPL Report DEM-ES 010
- Statistics standards to support metrology 2006–07
MG Cox
NPL Report DEM-ES 025
- Testing automatic mesh generation software
L Wright
NPL Report DEM-ES 021
- Testing functions for calculating the discrete Fourier transform and its inverse
IM Smith, K J Lines, F O Onakunle
NPL Report DEM-ES 016
- Testing the numerical correctness of software
IM Smith, PM Harris, KJ Lines
NPL Report DEM-ES 004
- XML for Data Curation
RM Barker
NPL Report DEM-ES 008
Newsletters
