National Physical Laboratory

Ultrasound to improve algae harvest

Scientists from the National Physical Laboratory (NPL) are using ultrasound to reduce the amount of energy needed to harvest microalgae.

Image courtesy of Fraunhofer IGB
Image courtesy of Fraunhofer IGB

Around 7,000 tons of microalgae is grown and used each year for a wide variety of applications, from livestock feeds to pharmaceuticals. However, the harvesting process uses a large amount of energy because the concentration of algae produced is very low, around 0.5% when grown in photobioreactors or open ponds. This means that almost all of the material that ends up in centrifuges to separate out the algae is water.

The Algaemax project is funded by the European Commission under the Seventh Framework Programme, and is part of the Research for SMEs (R4SME) scheme. It aims to reduce the amount of energy needed to harvest algae.

NPL is working alongside partners from Spain, the Netherlands, Turkey and the UK to develop an ultrasound-based flow processor, which will harness low power sound to increase the concentration of algae prior to harvesting and reduce the processing costs.

The Algaemax Flowcell will create acoustic standing waves in the liquid, which will generate local forces on particles, causing the algae to clump together. The designed cell will produce an algae-enhanced fluid at a concentration level or around 5%, which will then be separated out using commercial technologies.

The technical challenges include maintaining the resonant standing waves in the constantly changing fluid and ensuring that the algae is not destroyed by high acoustic pressures through the process of cavitation. This is where bubbles are formed and implode within a liquid creating high temperatures and pressures.

NPL will test design concepts, carry out theoretical modelling and liaise with suppliers to build and operate the Algaemax Flowcell in a laboratory environment.

More on NPL's work in Acoustics

Find out more by visiting the Algaemax project website

You can also keep up to date on project progress via Facebook and Twitter

For further details, please contact Mark Hodnett

Last Updated: 1 Jul 2013
Created: 27 Jun 2013