New and improved technology for measuring power quality in smart grids could save 839,000 tonnes of carbon and bring £250 million annually in economic benefit. The technology has been developed by scientists working at the Centre for Carbon Measurement, at the National Physical Laboratory (NPL).

Swedish wind farm

The growing complexity of the increasingly demanding and decentralised system for generating and distributing energy to homes and businesses creates many opportunities for power quality to be compromised. To address this, Smart Grids have the potential to manage and monitor electricity throughout networks such as the National Grid. Electricity information is used to improve distribution and support integration of new power sources, such as renewables where power generation is more volatile.

To minimise compromises, and maximise efficiency, real-time monitoring of power quality in the grid is essential. A 'metrology grade' digitizer developed by the Centre for Carbon Measurement provides one of the most accurate portable methods of making these measurements, and initial projects alone look set to produce huge carbon reductions.

The Digitizer takes sample measurements of current and voltage using non-invasive techniques at about 25,000 times per second, and sends these measurements to an analogue to digital converter. It can then carry out real time maths using NPL developed algorithms to calculate various parameters relating to power quality. These levels of accuracy were previously confined to the laboratory, but can now be made in the field. Measurements can be made at several points throughout the grid and compared.

The team that designed the digitizer used it to study power quality on one of the most challenging components of the Smart Grid - a large scale photovoltaic array (PV) installation. The findings will enable grid planners to anticipate and sidestep several potential pitfalls in the design of the future grid and thus should make a highly significant contribution to carbon reduction.

An independent report by Technologia calculated that the projected carbon savings from this project could be as much as 167,000 tonnes and would bring £50M of economic benefit each year from the retail value of the increased electricity output of solar cells.

The system is now being used in Belgium, Denmark and Turkey, helping scientists assess the impact of renewable electricity on the Smart Grid and plan for ambitious energy transmission schemes. Two more are being used in Sweden to monitor the power quality of a 255 kilometre submarine cable between Sweden and Poland.

If the impact of the five digitizers in use across Europe is comparable, as is suspected, the total annual benefits delivered would be 839,000 tonnes of carbon savings and up to £250 million GVA.

The digitizer was shortlisted for Best New Product in the Climate Week Awards.

The Centre for Carbon Measurement is now planning to licence the proprietary digitizer design to a commercial instrument supplier which will massively expand the user base and greatly enhance its influence on the architecture and composition of the Smart Grids of the future.

The Centre for Carbon Measurement at NPL is co-hosting a Measurement to Enable Smart and Intelligent Grids event at the Royal Academy of Engineering on 1 May 2013.

Find out more about NPL's work in Electromagnetics

Find out more about the Smart Electrical Grids EMRP project

For more information, please contact Paul Wright