ANAMET - Publications
Below is the continued list of ANAMET reports which may be of interest to the ANAMET community:
For more information contact: Nick Ridler, ANAMET Chairman
| Download |
Author(s) | Details |
| Report 028 | Pertti Saarinen | Radar waveguide measurements using a network analyser's time domain option: some good practice tips |
| Report 027 | N M Ridler | Time domain analysis using network analysers: some good practice tips |
| Report 026 | J de Vreede | Draft EA guidance document: Assessment of calibrated vector network analysers (VNA) |
| Report 025 | G J French | Measurement of non-insertable devices using one-port calibrations |
| Report 024 | D Hall | Return loss measurements on non-insertable two-port devices |
| Report 023 | G J French | Averaging repeat measurements of low magnitude S-parameters |
| Report 022 | G J French | ANAMET-982: Live torque comparison exercise |
| Report 021 | K Drazil | One-port calibration: Nonideal Standards and residual error terms |
| Report 020 | M Rodriguez | Three-term error correction in one-port calibrations |
| Report 019 | J de Vreede | Draft procedure for the assessment of Vector Network Analysers (VNAs) |
| Report 018 | N M Ridler & C Graham | An investigation into the variation of torque values obtained using coaxial connector torque spanners |
| Report 017 | P R Young | Propagation of uncertainty in one-port ANA measurements |
| Report 016 | Ian Instone | Calibrating an ANA - Techniques where calibration kits are not available |
| Report 015 | A D Skinner | Guidance on using coaxial connectors in measurement - Draft for comment |
| Report 014 | ANAMET Colloquium Digest | "What's the best method for calibrating an ANA?" |
| Report 013 | A D Skinner | Six Ports and Automatic Network Analyser - Two dimension error analysis |
| Report 012 | J P Ide | Destination unknown: A journey into the repeatability of WG25 measurements on an ANA |
| Report 011 | J P Ide | Test driving the Wiltron 365811NNF AUTOCAL ANA calibrator |
| Report 010 | N M Ridler & J C Medley | Improvements to traceability for impedance measurements at RF in the UK |
| Report 009 | K Drazil | Assessment of VNAs: Determination of Test Port Matches |
| Report 008 | N M Ridler & J C Medley | ANAMET-971: "live" investigation into variation in ANA measurements due to different calibration loads |
| Report 007 | N M Ridler & J C Medley | Live dial gauge comparison exercise: ANAMET-963 |
| Report 006 | N M Ridler | Anamet Measurement Comparisons 931, 942, 951 |
| Report 005 | A Knowleson & I Instone | Comparison of Hewlett- Packard and draft EAL methods of assessing network analyser measurement uncertainties |
| Report 004 | N M Ridler & J C Medley | The Anamet data analysis game |
| Report 003 | J Ruefenacht | Type - N Measurement Comparison at Lower RF& some additional results using different ANAs |
| Report 002 | G Orford, J Ide, N M Ridler & B Clarke | Draft EAL Procedure for the assessment of Vector Network Analysers (VNAs) |
| Report 001 | N M Ridler & J C Medley | Anamet - 962 Dial Gauge Comparison exercise |
