Below is a list of recent ANAMET reports which may be of interest to the ANAMET community:

(Please note: The downloadable reports are accessible to ANAMET members only. If you wish to join ANAMET, please click here)

For more information, please contact Nick Ridler, ANAMET Chairman

Download	Author(s)	Details
Report 053	B D Hall	Notes on complex measurement uncertainty, December 2010
Report 052	M J Salter	ANAMET 052: Comparison of Type-N sliding loads from 2 to 18 GHz, August 2010
Report 051	B D Hall	VNA Error Models: Comments on EURAMET/cg-2/v.01, June 2010
Report 050	C P Eio	Assessment of VNA Linearity October 2006
Report 049	C P Eio	Typical residual error values in coaxial lines up to 65GHz October 2005
Report 048	C P Eio & N M Ridler	Evaluating VNA post-calibration residual errors using the ripple technique at millmetre wavelengths in rectangular waveguide April 2005
Report 047	N M Ridler, M Salter & S H Fletcher	Anamet-022 Comparison of Type-N coaxial power splitter measurements from 1 GHz to 18 GHz December 2004
Report 046	B Williams & S Harter	28, 75 and 100 Ohm Impedance Air Line Standards August 2004
Report 045	B Hall & M Rodríguez	The Uncertainty of the 'Direct Method' for measuring the equivalent source mismatch of a power splitter: A case study in using software for uncertainty calculation July 2004
Report 044	B Williams	Overmoding transmission characteristics of Type-N connector 7mm line between 18 and 26.5 GHz May 2004
Report 043	M Rodríguez	Coverage Factor for Two Dimensional Distributions April 2004
Report 042	K Drazil	Uncertainty and traceability for measurement of reflection coefficient February 2004
Report 041	N M Ridler & A G Morgan	ANAMET-032: “Live” Dial Gauge Measurement Investigation using Type-N Connectors November 2003
Report 040	A G Morgan & N M Ridler	ANAMET-031: “Live” Investigation into the Performance of ANA Test Port Cables October 2003
Report 039	N M Ridler, M J Salter & S H Fletcher	ANAMET-021: comparison of Type-N coaxial power splitter measurements from 1 GHz to 18 GHz September 2003
Report 038	J P M de Vreede	Draft for Comment - Proposed Revision to the EA Guidelines on Evaluation of Vector Network Analysers (VNA) to include Uncertainty in Phase August 2003
Report 037	N M Ridler & M J Salter	An Approach to the Treatment of Uncertainty in Complex S-Parameter Measurements November 2002
Report 036	Martin Salter	Measuring signals close to the noise floor September 2002
Report 035	Manuel Rodríguez, INTA, Spain	Pass or Fail: with which probability? May 2002
Report 034	Patrik Persson, Celsius Metech	An algorithm for the evaluation of the residual directivity 'ripple' trace May 2002
Report 033	M J Salter	Converting between logarithmic and linear formats for reflection and transmission coefficients. Part 3: Propagation of distributions December 2001
Report 032	D Skinner	ANAMET Connector Guide January 2001
Report 031	M J Maddock & N M Ridler	ANAMET-991: TDNA measurement comparison exercise January 2001
Report 030	Manuel Rodríguez	Residual directivity and test port match: what are we actually measuring? January 2001
Report 029	A G Morgan & N M Ridler	Investigating the effects of interchanging components used to perform 'ripple' assessments on calibrated vector network analysers August 2000

Back to ANAMET Homepage