National Physical Laboratory

The unbelievable impact of calibration

Did you know that a single NPL density measurement calibration could impact over 300 companies and 12,000 km of pipes? Below we illustrate calibration, and its unbelievable impact.

What is calibration?

Companies use these calibrated 'floats' to confirm the density of materials
Companies use these calibrated 'floats'
to confirm the density of materials

Calibration is the act of comparing measuring equipment against a standard of higher accuracy. If this reveals errors, then corrections can be evaluated and applied.

What is traceability?

For a calibration to be considered traceable, there must be an unbroken chain of measurements, relating the calibration result to a national or international standard (such as the metre); and the calibration result must be accompanied by a statement of uncertainty.

Why are calibration and traceability important?

Although they may seem mundane, they can in fact have a real impact on a huge number of people, products, and businesses. We would like to illustrate this by detailing the interaction between NPL, a UKAS-accredited density measurement laboratory called H&D Fitzgerald, and just one of their many customers - Radius Systems.

From one, to many…

The thing to note about calibration is the fact that it has a large 'fan-out' effect, i.e. a single calibration can impact upon thousands of customers, products, and businesses.

This effect can be neatly demonstrated by observing that from a single calibration from NPL to H&D Fitzgerald, and onwards to Radius Systems, over 300 end-user customers are impacted.

When you realise that Radius Systems are just one of H&D Fitzgerald's 700+ customers, a conservative estimate of the true number of end-user customers impacted by the density standard maintained at NPL and disseminated by H&D Fitzgerald is undoubtedly in the thousands. And then when you consider that H&D Fitzgerald are just one of the seven accredited laboratories disseminating NPL's density standard you get a real sense of how large the fan out is.

The fan-out effect also extends to the finances involved in calibration. H&D Fitzgerald value their annual sales of floats vs. the price they pay for NPL's calibration services at 12:1.

Density calibration in a nutshell:

  1. NPL maintains the UK standard for density measurement
  2. NPL makes this standard available to UKAS-accredited laboratories
  3. Those laboratories calibrate their own equipment to the NPL standard
  4. Companies then test their products in the UKAS-accredited laboratories

 

The unbelievable impact of calibration - diagram
Click to enlarge and open in a new window
as a downloadable PDF


Radius Systems manufactures and supplies polyethylene (PE) pipe systems and services to over 300 customers across the following industries: gas, water, nuclear and civil construction. In 2011 alone they manufactured 12,000 km of pipework - almost the same distance as Earth's polar diameter. As these pipes transport essential utilities the material they are made from must be able to withstand the pressures of the liquid/gas they are transporting.

To confirm that pipe material is fit for purpose Radius Systems test its density using a calibrated float supplied by H&D. Radius Systems use the floats to check that the density is correct for PE raw materials they use to make their pipes and fittings. Two checks are conducted - first, the incoming resin to ensure it is the correct type (its density tells us this), and after processing to verify that processing the material has not affected its physical properties.

Safety is critical in Radius System's products, none more so than in their gas pipes. It is imperative that they can rely on the density measurement standards they buy from H&D Fitzgerald, as Martin Froggatt, Radius Systems' Quality Manager explains:

"If the density was wrong the material type would be incorrect, for example, rather than a PE100 pipe grade material we may have been delivered a PE that is designed for milk bottles and would not withstand the operating pressures that our pipes and fittings are designed for. If a gas line was to rupture and gas escape, it could explode! Fortunately, a density check prevents this from happening. Calibration of measuring equipment and devices is critical to the quality of our products. We have to be certain that what we use to measure is correct."

Product quality is also of paramount importance to Radius Systems, and precise density measurements enable them to identify whether they are using PE80 and PE100 grades of polyethylene. These materials are designed to withstand 50 years at either 8.0 or 10.0 MPa. Materials of a lesser density would be weaker, and therefore would need to be replaced sooner.

Companies such as Radius Systems who manufacture all their products under ISO EN 9001:2008 conditions are obliged to use UKAS-accredited laboratories.

For more information, please contact Graham Topley

Last Updated: 23 Apr 2013
Created: 23 Apr 2013

Registration

Please note that the information will not be divulged to third parties, or used without your permission

Login